5 Ways To Find The MAC Address On Kali Linux

How To Find The MAC Address On Kali Linux

Kali Linux is a powerful and widely used penetration testing and ethical hacking operating system. It’s essential for security professionals, researchers, and enthusiasts who want to test and strengthen the security of networks and systems. However, one crucial piece of information often required in network diagnostics and configurations is the MAC address. In this article, we’ll explore five different methods to find the MAC address on Kali Linux.

1. Using ifconfig

The ifconfig command is a common way to display network interface information on Linux systems. To find the MAC address using this method, open a terminal and type:


Look for the network interface you want to inspect (e.g., eth0 or wlan0) and find the line starting with “ether.” The MAC address will be listed next to it.

2. Utilizing ip command

The ip command is a modern replacement for ifconfig. It offers more detailed information about network interfaces, making it a preferred option for many. To find the MAC address with ip, follow these steps:

 ip link show
Utilizing ip command, MAC Address

In the output, locate the network interface you’re interested in, and the MAC address will be listed under the “link/ether” field.

3. Reading /sys/class/net/

Linux systems store network interface information in the /sys/class/net/ directory. You can easily find the MAC address by navigating to the appropriate interface directory. Use the following commands:

cd /sys/class/net/<interface_name>
cat address

Replace <interface_name> with the actual name of the network interface, such as eth0 or wlan0. The MAC address will be displayed.

4. Checking Network Manager Connections

If you are using Network Manager to manage your connections, you can find the MAC address through its interface. Here’s how:

  1. Click on the Network Manager icon in the system tray.
  2. Go to “Edit Connections.”
  3. Choose the connection you want to inspect and click “Edit.”
  4. In the “Ethernet” or “Wi-Fi” tab, you’ll find the MAC address listed under the “Device MAC Address” field.

5. Using ethtool

The ethtool command provides advanced control and status information for network interfaces. It’s another reliable method to find the MAC address on Kali Linux. Simply run:

 ethtool <interface_name>

Replace <interface_name> with the appropriate network interface identifier. The MAC address will be shown in the “Permanent address” field.


Knowing how to find the MAC address on Kali Linux is essential for various networking and security tasks. In this article, we covered five different methods: using ifconfig, utilizing the ip command, reading /sys/class/net/, checking Network Manager connections, and using ethtool. Each method provides valuable information about network interfaces and helps security professionals and enthusiasts in their daily tasks.


  1. Can I change my MAC address on Kali Linux? Yes, you can change your MAC address using the ifconfig or ip command. However, be cautious as MAC address spoofing can have legal and ethical implications.
  2. Why is the MAC address important for network security? MAC addresses are used for device identification in networks. Security measures like MAC filtering and MAC-based authentication rely on MAC addresses to control network access.
  3. Can I find the MAC address of devices on my local network? Yes, you can use network scanning tools like Nmap to find MAC addresses of devices connected to your local network.
  4. Is it possible to have multiple MAC addresses on a single network interface? No, each network interface has a unique MAC address. However, virtual interfaces may share the same MAC address as their parent interface.
  5. Are MAC addresses secure? MAC addresses are not designed for security purposes and can be easily spoofed. For enhanced security, other mechanisms like IPsec and SSL/TLS are used.

Also Read:

How To Change The MAC Address On Your Computer

Hacking a Windows Machine by Hiding a RAT Inside an Image

How to use Linux ifconfig command

Nmap Cheat Sheet For Penetration Testing


No comments yet. Why don’t you start the discussion?

Leave a Reply